Yayınlar & Eserler

Makale 30
Bildiri 26
Kitap 7
Editörlük 1
Tez Danışmanlığı 6
Tümü (70) YÖKSİS (70) WOS (15) Scopus (2) TR Dizin (10) Diğer (3) Ulusal (1) Uluslararası (25)
01

Nano‐Engineered Basalt Fiber Composites With Halloysite Nanotubes: Durability and Drilling Behavior After Acidic Aging

ASLAN İBRAHİM, YAKA HARUN, ULUS HASAN, KAYBAL HALİL BURAK (2026)

Polymer Composites

Uluslararası Hakemli SCI-Expanded Q2 Özgün Makale YÖKSİS https://dx.doi.org/10.1002/pc.71434
02

Bioactive Bone Scaffolds Using a Custom-Built 3D Bioprinter and Glass-Doped Alginate Nanocomposite Bioinks: Fabrication and Chemical Analysis

AKILLI ARI AYSU, YAKA HARUN, ISFAHANİ REZA BARBAZ (2026)

IRANIAN JOURNAL OF CHEMISTRY & CHEMICAL ENGINEERING-INTERNATIONAL ENGLISH EDITION

Uluslararası Hakemli SCI-Expanded Q4 Özgün Makale YÖKSİS https://dx.doi.org/10.30492/ijcce.2026.2087122.7496
03

Multi-response optimization of EDM parameters for DIN 1.2365 steel using Taguchi-grey relational analysis

YAKA HARUN (2026)

Multidiscipline Modeling in Materials and Structures

Uluslararası Hakemli SCI-Expanded Q2 Özgün Makale YÖKSİS https://dx.doi.org/10.1108/MMMS-11-2025-0464
04

Enhancing the Machinability of Basalt Fiber-Reinforced Composites Through Innovative Drill Design and Material Modification

YAKA HARUN, KASTA MEHMET, ASLAN İBRAHİM, BİLGİN MEHMET BURAK, ULUS HASAN, KAYBAL HALİL BURAK (2025)

Fibers and Polymers

Uluslararası Hakemli SCI-Expanded Q2 Özgün Makale YÖKSİS https://dx.doi.org/10.1007/s12221-025-01102-z
05

The Role of Welding Parameters in Enhancing Joint Strength and Durability for AISI 1040 and 316 Steels

YAŞAR YALÇIN, ASLAN İBRAHİM, KAYBAL HALİL BURAK, YAKA HARUN (2025)

Pamukkale University Journal of Engineering Sciences

Uluslararası Hakemli ESCI Özgün Makale YÖKSİS https://dx.doi.org/10.5505/pajes.2025.74611
06

Effect of Hydrothermal Ageing on Interlaminar Shear Strength of Glass Fiber Reinforced Recycled PLA Matrix Composites

YAKA HARUN, ASLAN İBRAHİM (2025)

Gazi Journal of Engineering Sciences

Uluslararası Hakemli TR DİZİN Özgün Makale YÖKSİS https://dx.doi.org/10.30855/gmbd.070525AR03
07

Friction Stir Welding (FSW) and Friction Stir Spot Welding (FSSW) on Polycarbonates: A Review

YAKA HARUN, ASLAN İBRAHİM (2024)

SELCUK UNIVERSITY JOURNAL OF ENGINEERING SCIENCES

Uluslararası Hakemli Index Copernicus Derleme Makale YÖKSİS
08

Farklı amper değerlerinde MIG ve TIG kaynağı ile birleştirilen AL5083 plakaların mekanik özelliklerinin incelenmesi

YAŞAR YALÇIN, YAKA HARUN, ASLAN İBRAHİM, KAYBAL HALİL BURAK (2024)

International Journal of Engineering Approaches

Uluslararası Hakemli Google Scholar Özgün Makale YÖKSİS
09

AISI D2 Soğuk İş Çeliğinin Delinmesinde Deneysel ve Sonlu Elemanlar Analizi Yoluyla Delik Kalitelerinin İyileştirilmesi ve İşleme Parametrelerinin Optimizasyonu

YAKA HARUN, ENGİN KAAN EMRE (2023)

Igdir University

Ulusal Hakemli TR DİZİN Özgün Makale YÖKSİS https://dx.doi.org/10.21597/jist.1310601
10

Experimental and numerical analysis of distortions after enamel coating process on oven catalytic side panel sheets

DURMUŞ SAMET, YAKA HARUN (2023)

Thermal Science

Uluslararası Hakemli SCI-Expanded Q4 Özgün Makale YÖKSİS https://dx.doi.org/10.2298/TSCI2304061Y
11

Enhancement of Shear Strength in Lap Joints with Different Surface Patterns

YAKA HARUN, SEMİZ LEVENT, AKKUŞ HARUN (2023)

Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi

Ulusal Hakemli TR DİZİN Özgün Makale YÖKSİS
12

NİKEL ESASLI SÜPER ALAŞIMLARIN DELİNMESİNDE İŞLEME PARAMETRELERİNİN GRİ İLİŞKİSEL ANALİZ VE TAGUCHI İLE OPTİMİZASYONU

ATILKAN RAMAZAN, YAKA HARUN (2023)

Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi

Ulusal Hakemli TR DİZİN Özgün Makale YÖKSİS https://dx.doi.org/10.17780/ksujes.1167745
13

Evaluating the parameters for electrode wear rate in electrical discharge machining of H13 steel

MALO YUSUF, YAKA HARUN (2023)

Selcuk University Journal of Engineering Sciences

Uluslararası Hakemli INDEX COPERNICUS Özgün Makale YÖKSİS
14

Effect of drilling parameters on hole quality in drilling of pultruded GFRP composite material: Surface roughness, thrust force and delamination factor

ENGİN KAAN EMRE, YAKA HARUN (2023)

Omer Halisdemir Universitesi

Ulusal Hakemli TR DİZİN Özgün Makale YÖKSİS https://dx.doi.org/10.28948/ngumuh.1335448
15

Multiple Optimization of Cutting Parameters Affecting Kerf Formation and Surface Roughness in Laser Cutting of Al 5052 Alloy

YAKA HARUN (2022)

El-Cezeri Fen ve Mühendislik Dergisi

Uluslararası Hakemli Scopus Özgün Makale YÖKSİS https://dx.doi.org/10.31202/ecjse.958728
16

Optimization of Cutting Parameters in Turning of Titanium Alloy (Grade 5) by Analysing Surface Roughness, Tool Wear and Energy Consumption

AKKUŞ HARUN, YAKA HARUN (2022)

Experimental Techniques

Uluslararası Hakemli SCI-Expanded Q4 Özgün Makale YÖKSİS https://dx.doi.org/10.1007/s40799-021-00525-6
17

Experimental and response surface methodology investigation of cast material obtained by melting and recycling of chips

AKKUŞ HARUN, YAKA HARUN (2021)

Celal Bayar University Journal of Science

Ulusal Hakemli TR DİZİN Özgün Makale YÖKSİS https://dx.doi.org/10.18466/cbayarfbe.898972
18

MEASUREMENT OF SURFACE QUALITY AND OPTIMIZATION OF CUTTING PARAMETERS IN SLOT MILLING OF GFRP COMPOSITE MATERIALS WITH DIFFERENT FIBER RATIOS PRODUCED BY PULTRUSION METHOD

YAKA HARUN (2021)

Surface Review and Letters

Uluslararası Hakemli SCI-Expanded Q4 Özgün Makale YÖKSİS https://dx.doi.org/10.1142/S0218625X21500955
19

Tornalama Sonrası Çıkan Talaşlardan Elde Edilen Alüminyum 5000 Alaşımının Yüzey Pürüzlülüğünün Taguchi Yöntemi ile Analizi

YAKA HARUN (2021)

Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi

Ulusal Hakemli TR DİZİN Özgün Makale YÖKSİS https://dx.doi.org/10.21597/jist.771868
20

PVC and POM gripping mechanisms for tension testing of FRP bars

BAŞARAN BOĞAÇHAN, YAKA HARUN, KALKAN İLKER (2021)

Structural Engineering and Mechanics

Uluslararası Hakemli SCI-Expanded Q2 Özgün Makale YÖKSİS https://dx.doi.org/10.12989/sem.2021.77.1.075
21

Experimental and statistical investigation of the effect of cutting parameters on surface roughness, vibration and energy consumption in machining of titanium 6Al-4V ELI (grade 5) alloy

AKKUŞ HARUN, YAKA HARUN (2021)

Measurement

Uluslararası Hakemli SCI-Expanded Q1 Özgün Makale YÖKSİS https://dx.doi.org/10.1016/j.measurement.2020.108465
22

Engineering plastic gripping mechanism for tension testing of FRP bars

BAŞARAN BOĞAÇHAN, YAKA HARUN, KALKAN İLKER (2020)

Journal of Composite Materials

Uluslararası Hakemli SCI-Expanded Q3 Özgün Makale YÖKSİS https://dx.doi.org/10.1177/0021998320933658
23

Selection of Appropriate Cutting Parameters to Achive Optimum Surface Roughness with Taguchi

YAKA MEHMET, BİLGİN MEHMET BURAK, YAKA HARUN (2019)

International Journal of Scientific and Technological Research

Uluslararası Hakemli Scopus Özgün Makale YÖKSİS https://dx.doi.org/10.7176/JSTR/5-3-06
24

DETERMINATION OF OPTIMUM CUTTING PARAMETERS ON FREE FORM SURFACES IN TERMS OF FORM ERRORS AND MACHINING TIMES

YAKA HARUN, DEMİR HALİL, GÖK ARİF, AKKUŞ HARUN (2018)

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES

Uluslararası Hakemli Emerging Sources Citation Index (ESCI) Q4 Özgün Makale YÖKSİS
25

Optimization of Turning Process By Using Taguchi Method

AKKUŞ HARUN, YAKA HARUN (2018)

Sakarya University Journal of Science

Ulusal Hakemli TR DİZİN Özgün Makale YÖKSİS https://dx.doi.org/10.16984/saufenbilder.409502
26

Creating The Mathematical Model For The Surface Roughness Values Occurring During The Turning of The AISI 1040 Steel

AKKUŞ HARUN, YAKA HARUN, UĞUR LEVENT (2017)

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES

Uluslararası Hakemli Emerging Sources Citation Index (ESCI) Q4 Özgün Makale YÖKSİS
27

OPTIMIZATION OF THE CUTTING PARAMETERS AFFECTING THESURFACE ROUGHNESS ON FREE FORM SURFACES

YAKA HARUN, DEMİR HALİL, GÖK ARİF (2017)

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES

Uluslararası Hakemli Emerging Sources Citation Index (ESCI) Q4 Özgün Makale YÖKSİS
28

Statistical analysis of surface roughness in turning process

AKKUŞ HARUN, YAKA HARUN, UĞUR LEVENT (2017)

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi

Uluslararası Hakemli Emerging Sources Citation Index (ESCI) Özgün Makale YÖKSİS https://dx.doi.org/10.5505/pajes.2016.01212
29

AISI 1040 Çeliğinin Tornalamasında Kesme Parametrelerinin Yüzey Pürüzlülüğüne Etkisinin Taguchi Metodu İle Optimizasyonu

YAKA HARUN, AKKUŞ HARUN, UĞUR LEVENT (2016)

Celal Bayar Üniversitesi Fen Bilimleri Dergisi

Ulusal Hakemli TR DİZİN Özgün Makale YÖKSİS https://dx.doi.org/10.18466/cbujos.26612
30

AISI 1040 Çeliğinin Tornalanmasında Yüzey Pürüzlülüğünün Çoklu Regresyon ile İncelenmesi

YAKA HARUN, UĞUR LEVENT, AKKUŞ HARUN (2016)

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi

Ulusal Hakemli TR DİZİN Özgün Makale YÖKSİS https://dx.doi.org/10.5578/fmbd.34280